0 item
2000 Watt 11 Blade Missouri Freedom II Wind Turbine

909.99 909.9900000000001 USD


This combination does not exist.

Category: Wind Turbines

Features the superior quality and performance of the Freedom II PMG™ with our original Raptor Generation 4 carbon fiber blades!

Our Missouri Freedom Wind Turbines are hot dipped galvanized with zinc plated hubs! Resists rust - No need for painting or special coating for up to 50 years under normal conditions.

Missouri Freedom Galvanized Wind Turbine

Low wind speed rated wind turbine for home, business, or remote use with the Freedom II Permanent Magnet Generator™ (PMG) - 2000 Watts plus potential power!

Raptor Generation 4 carbon fiber blades self regulate their speed in high winds (also available in 7 and 9 blade models or our Falcon Mach 4 80" blade ).

Our newest innovation in power generation! Brand new Freedom II Permanent Magnet Generator™ (PMG) - This is our highest amp model - Up to 2000 watts of output!  NO COGGING - Cut in wind speed of 6 MPH

Our Freedom I and Freedom II PMGs are now designed with a keyed shaft and hub stabilizer as well as includes a self-tightening cam-lock washer to prevent the blade set from ever spinning on the shaft. 

How easily do the blades turn?  What about cogging?  The Missouri General™ Freedom II Wind Turbines have a cut-in wind speed of 6 MPH and NO COGGING! 

This unit comes with:


    • Freedom ll PMG has no brushes, very dependable!  

    • 125,000 hours + of rated bearing life.

  • Two heavy duty bridge rectifiers for converting 3 phase to DC output. 

  • Mounting Bracket and Heavy Duty Stars & Stripes Wind Turbine Tail.

  • Tail fin measures 29" tall for maximum tracking.

  • No slip rings to fail or replace. Wire tension system.

  • Comes with 11 Raptor Series black carbon fiber composite blades

    • Aerodynamically tapered RAPTOR Series Black Carbon Fiber Blades ™ for maximum output.

    • Blades Make 62 1/2" dia. swept area

  • Steel blade hub is 1/4'' thick x 9'' in diameter

  • Mounting Bracket Fits on 1.5" schedule #40 or #80 pipe.

  • Heavy duty Hub spacer/stabilizer

  • Zinc plated yaw bearing for smooth, easy wind tracking.

  • 3 YEAR Limited WARRANTY

Weight & Dimensions:

  • Turbine Weight: 47 pounds

  • Shipping Weight: 55 pounds

  • Rotor Diameter: 62 1/2 inches 

Missouri Wind and Solar FREEDOM II PMG™ (permanent magnet generator) - our newest innovation in power generation!

Our  Freedom II PMG™ permanent magnet generator is specifically designed for wind turbine use and can even be used with vertical axis wind turbines (VAWT). 

This Freedom II™ permanent magnet generator works best with our 7, 9, or 11 Blade Raptor™ blades and hub or our new Falcon Mach 4 80" 3 blade set.

Why buy a Freedom II PMG™ over a Delco car alternator PMA?

The answer is simply more copper!  More copper equals more power - each Freedom PMG™ rotor contains twice as much copper than any Delco style PMA.

Freedom II PMG™ Features: 

  • Specifically designed for wind turbines


  • 17 mm Stainless steel shaft - compatible with all Missouri Wind and Solar wind turbine hubs

  • Polished aluminum case

  • Zinc plated 28 magnet rotor and skewed stator core

  • For charging 12, 24, or 48 volt battery banks

Freedom II PMG™ Specifications:

  • 3/8" diameter bolt holes

  • 1 15/16" on center between mounting holes

  • 5 7/8" OD width

  • 6 5/16" tall

  • 9 1/2" overall length

3 phase output is the most efficient, no voltage and amperage loss in long runs like DC suffers from. DC output requires heavy expensive cable and has a high power loss over long runs. Straight DC output is now just simply old technology. If you are replacing a DC output model you can just mount the two included bridge rectifiers at the top of the tower for the same run of wire as your DC model if you wish.

The bridge rectifier converts the long run of efficient 3 phase into DC next your charge controller, batteries, or grid tie inverter. The 3 phase output can be used direct to some equipment like 3 phase grid tie inverters with the use of batteries. Either way you use it this is a very versatile output wind turbine.

Missouri Wind Freedom II PMG

Wind Turbine Wiring Diagram
You can compare max 4 products.