0 item
12 Volt 1250W Dump Load Resistor Heater


115.11 115.11000000000001 USD

144.24

SKU: DL1250W12V


90 Amp, 1250 Watt, 12 Volt Diversion Load Center

Designed for use with Diversion Controllers


This Diversion Center Can be mounted on to a wall to provide heating as well as serve as a diversion (dummy) load.


Five resistors mounted directly to 0.063 aluminum sheets to provide the electrical connection.  Both sheets are then mounted to a piece of ceramic board and enclosed in a Hoffman 8 x 12 x 4 inch enclosure with a vented cover.


The unit is very safe if mounted properly. We recommend that the box be mounted on a piece of non-flammable material (Cement board etc.) or thick plywood, with some air space between the box and plywood. Do not mount this heater on thin panel walls or similar. Be sure all flammable objects are at least 16 inches from the front of this unit, 8 inches from the sides and 2 inches from the back.



ATTENTION: These resistors will become hot during normal use, please mount them away from heat sensitive objects and out of the reach of children.

You can compare max 4 products.