A solar charge controller is one of the key components of an off-grid solar system. The ENS series can accommodate multiple battery styles. It includes a large LCD screen for easy viewing. Aluminum heat sink for quick cooling. Solar Charge Controller for both 12 and 24 Volt Systems.
Digital solar charge controller features:
Use the load timer to run our solar grid-tie inverters during peak hours right from your batteries and or solar panels. Set the on and off time to run it as long as you want. Peak hours are when the electric company charges you almost twice as much to use your electricity. This is usually between 11-3 pm in the summer and 5-10 pm in the winter!
The controller has four battery input terminals, four solar panel input terminals, and four load terminals. The load terminals are for running various DC loads like lights or our solar grid-tie inverters. It has full self-protection, overload protection, short circuit, reverse connection, overcharging and over discharging, etc.
When the battery is connected to the charge controller, it will detect the voltage of the battery first then will decide how to charge the battery connected.
The controller has an LCD display, 4 buttons, and 8 terminals. The LCD screen displays the battery voltage, total PV charge Ah, total PV discharge Ah, constant voltage charge setting, low voltage disconnect setting, and low voltage reconnect setting.
Charge Controller Specifications:
Model
40 Amp (PWMSCC_40)
60 Amp (PWMSCC_60)
Nominal Battery Charge Current
40A
60A
Maximum PV Input Power
[email protected] / [email protected]
Normal Voltage
12/24V, automatic recognition
Maximum Solar Input Voltage (VOC)
<30V/48V
Minimum Solar Input Voltage (VMP)
>16V/32V
Power Conversion Efficiency
Max. 90%
Standby Power Consumption
<20mA
Length â°Â¤1m Charge Loop Drop
<0.25V
Length â°Â¤1m Discharge Loop Drop
<0.05V
Temperature Compensation
-3 mv/cell *K
LCD Screen Display
Battery voltage, total PV charge Ah, total PV discharge Ah, constant voltage charge setting, low voltage disconnect setting, low voltage reconnect setting.
Buttons
Menu, Load (On/Off), Up, Down
Ambient Temperature Range
-40 to 50°C
Case Protection
IP22
Float Charge
13.8V/27.6V
Constant Voltage Charge
14.6V (14~15V settable) / 29.2V (28~30V settable)
Low Disconnect Voltage
11V (10.4~11.4V settable) / 22V (20.8~22.8V settable)
Low Reconnect Voltage
12.8V (12.2~13.2V settable) / 25.6V (24.4~26.4V settable)
Grounding
Positive Grounding
Battery Type
GEL, AGM, Solar Battery, etc.
Dimensions (LxWxH)
6.77 x 4.96 x 2.95 (172mm x 126mm x 75mm)
Weight
1.7 lbs (0.77 kg)
Documents:
Copyright © MWANDS.COM, LLC..