MidNite Solar Classic 250 SL MPPT Charge Controller

Write a Review

Your Price: $696.27

Questions about this item? Be the first to ask here.

Part Number: CLASSIC250-SL

Availability: In Stock.

Quantity

Description

MidNite Solar Classic SL-250 MPPT Charge Controller

The Classic SL-250 MPPT Charge Controller is a simplified SOLAR ONLY version of the Classic 250 with streamlined menus. The Classic SL-250 has a graphics panel and ground fault but no arc fault or Ethernet capabilities. The Classic SL-250 has a maximum output current of 96 amps, an operating voltage of 250 volts and works with 12 to 72 volt battery systems. As with the whole Classic Line, the Classic 250-SL has MidNite's exclusive HyperVOC which extends VOC limits when needed. With a streamlined menu, these SOLAR only MPPT charge controllers are easy to setup and a breeze to install!

Proudly made in the USA with American workers!

MidNite Classic SL 250 Features:

User friendly menu structure
Manual Equalize
Built in DC-Ground Fault Protection (Earth Fault)
Communicates with the Whizbang JR
Dual display capable
250VDC operating voltage
Exclusive HyperVOC extends VOC limits
380 days of daily history, 24 hours of data at 5 minute intervals
12-72 volt battery charging standard
Communications - Modbus & RS232
Will parallel with other Classic SL's, Standard Classics, and Classic Lites
ETL Listed for the USA & Canada
Made in the USA

MidNite Solar offers an industry first, an extended warranty for all the Classic MPPT charge controllers. Six months prior to the end of the warranty period customers can ship their Classic back to MidNite Solar with a check for $147 dollars plus shipping and we will replace any wearable parts and do a general tune-up. This will extend the warranty by 2 additional years, another good reason to purchase a Classic.

Classic SL MPPT Charge Controller Specifications:

14.9"L x 6"W x 4"D
Warranty - 5 yrs.
Listed by ETL for US & Canada
CE Certified Listed
FCC Class B Listed
Made in the USA

Nominal Battery Voltage	12 Through 72 volts on Classic SL's
Maximum Output Current	61A on 12V, 62A on 24V, 55A on 48V and 43A on 72V battery
PV Open Circuit Voltage VOC (NOTE: See HyperVOC at bottom)	250V + HyperVOC (battery voltage up to 48V) Example: 200V + 48V = 298VOC
Power Conversion Efficiency	98% (Typical system)
Maximum Stand-By Self-Consumption (12V)	2.8W - 4W
Reverse Current At Night	Zero - Internal relay for reverse current
Low Battery Voltage	Low Battery voltage disconnect and re-connect of loads fully programmable with 2 Auxiliary outputs to control external load disconnect /re-connect switches
Hyper VOC (NOTE: See HyperVOC at bottom)	Standard all models - Extended VOC range for cold climates
Ground Fault Protection	Standard all models - resettable, no fuse to blow
Charging Regulation	Bulk, Absorb, Float as well as Equalization
Battery Voltage Regulation Set Points	10-100VDC
Equalization Charging	Adjustable Voltage and Duration, Manual or Auto
PV Reverse Polarity	Protected to Max VOC ( Classic MPPT Charger Controllers are fully protected from reverse current on both input and output)
Battery Reverse Polarity	Fully protected ( Classic MPPT Charger Controllers are fully protected from reverse current on both input and output)
Battery Short Circuit	Fully protected
Battery Temp Compensation	Automatic when BTS is installed, Adjustable mV per degree C per 2V cell
Programmable Auxiliary Control Output	2 Auxiliary outputs, Aux1 can be 12V out or dry contact, Aux2 is 12V out or Logic IN
Graphic Display	Graphical display
Networking Cabling	Standard 4 conductor phone cable, no hub needed
Communications	RS232 and ModBus openly published protocol
Remote Display	Display (MNGP) can be relocated and a second display can be added
Terminal Rating	75 C
Data Logging	380 days of daily history, 24 hours of data at 5 minute intervals
Positive Ground Applications	Requires 2 pole input and output breakers
Operating Temperature	Minimum of -40C to 50C - Controller will auto derate as temperature rises above 25C
Environmental Rating	Indoor type IP30 (The Classic is IP22 Rated to 60529 when used with Classic Drip Shield)
Conduit Knock-Outs	Single 1" conduit (35.05mm) on left and right sides. Two 1" conduit (35.05mm) on bottom. Two 3/4" conduit (27.76mm) on back.
Warranty	5 Year standard
Weight & Dimensions	12 lbs (5.45 kgs) 14.9" x 6" x 4" (378 mm x 152 mm x 102 mm)
Shipping Dimensions HxWxD	19" x 8.5" x 5.7" (482.6 mm x 215.9 mm x 144.78 mm)
Options	MNGP graphical display, 3ft networking cable (NOTE: MNGP standard with all Classic SL models)
Certifications	Listed by ETL for US & Canada, CE Certified, FCC Class B, IEC62109 pending

*HyerVOC: A non-operative VOC safety zone over and above the maximum input voltage for cold climates.

Click here to download the User Manual

Use the classic sizing tool

MidNite Solar Classic 250 SL MPPT Charge Controller

MidNite Solar Classic SL-250 MPPT Charge Controller

Browse Similar Items

Recently Viewed Items

Mailing List