Magnum ME BMK Battery Monitoring Kit with Shunt

Monitoring your battery bank is easy with the Battery Monitor Kit (ME-BMK)* from Magnum Energy. Acting as a "fuel gauge" for your batteries, the ME-BMK monitors their state of charge (SOC) and then provides this information in an easy-to-understand display via the ME-ARC or ME-RC remotes. With accurate SOC readings, you can avoid unnecessary battery recharging, saving on fuel and long-term maintenance costs.

If you already have a Magnum Inverter/Charger and Remote (ME-ARC or ME-RC) (requires remote rev 2.0 or higher), the ME-BMK is an easy retrofit. Simply install the kit according to the installation manual and begin monitoring your battery bank via the "Meter" button.

Product Features:

• Compatible with 12, 24 or 48 volt systems
• One adjustable setting - very easy setup
• All battery meter and Magnum inverter/charger set-up and monitoring features in a single convenient display - doesn't require multiple displays for inverter and battery system information
• Displays reliable and pertinent information; such as:
• Battery State of Charge
• Battery Voltage
• Battery Current
• Auto-detecting input voltage
• Temperature and battery bank capacity automatically compensated and coordinated between inverter and battery monitor

• Precision 500A/50mv DC shunt (included in ME-BMK)
• Automatic efficiency detection

Specifications:

ME-BMK:

• DC Volts: 7 to 70 (±0.5%) auto voltage detection
• DC Amps: ±0.1 to 999 (±1.0%)
• Battery SOC %: 0 to 100% (1% increments)
• Power Draw: <0.6 watts
• Amp Hours In/Out: ±32,768 amp hours (1 AH increments)
• rAH out (resettable amp hours removed): 0 to 65,535 amp hours, resettable (0.1 AH increments)
• tAH out (total amp hours removed): 0 to 65,535,000 amp hours (0.1 k or 100 AH increments)
• Minimum/Maximum DC: 7 to 70 VDC, resettable
  
• Shipping Weight: 2 lb (0.9 kg)
  
• Kit Includes: Manual, sense module, DC shunt, twisted pair wire, and communication cable
• Sense Wire: Twisted pair - blue & orange, 5 foot length, 18 AWG wire
• Communication Cable: 4-conductor, 10 foot twisted pair, telephone standard
• Remote Requirements: Use with an ME-RC with firmware revision of 2.0 or higher or an ME-ARC (all revisions)

DC Shunt:

• Resistance: 0.1 milliohm (500A at 50mV)
• Continuous Current: 410 amperes maximum
• Overload Current: Overloads to 500 amps for less than 5 minutes if normally operated at less than 300 amps