Centron Kilowatt Meter
Centron Kilowatt Meter

REFURB Digital Kilowatt Meter, ITRON Type C1S

Write a Review
Your Price: $37.99
Part Number: DIGITAL-KWH-CENTRON
Availability: In Stock.

Digital Kilowatt Meter, CENTRON Type C1S, Form 2S, 240 Volt, CL200, REMFG

The LCD meter is the standard utility-grade meter seen on most homes. Form 2S, 120/240 VAC, Single directional (not for net metering).

The CENTRON C1S solid-state meter is used for measuring single-phase energy consumption. With this solid-state meter, the C15 presents a platform for residentialmetering with the flexibility to adapt as your needs expand and change.

The CENTRON C1S is available as an energy meter with an LCD register. As an option, the meter is available with interchangeable personality modules, including demand, time-of-use (TOU), load profile and various communication options.

Flexible Platform

 

 

  • The CENTRON meter can easily be upgraded to any of the optio modules available
  • All calibration data is permanently stored in the base of the meter on the CENTRON metrology board

 

Personality Modules

 

  • The interchangeable personality modules are part of a snap-in register assembly
  • The personality module houses all register or communication functions

 

Enhanced Performance

 

  • Low starting watts
  • Low burden
  • Captures energy that was not monitored in the past by electromechanical meters

 

Tamper Resistant

 

  • Measures energy even if the meter is inverted

 

Standard Features

 

  • Electronic LCD register
  • Polycarbonate cover
  • Test LED Unattended Processing
Technical DataMeets applicable standards:

 

 

  • ANSI C12.1 - 1995» ANSI C12.10 - 1997
  • ANSI C12.20 (Class 0.5) - 1998
  • ANSI C37.90.1 - 1989
  • ANSI C62.45 - 1992
  • IEC 61000-4-4
  • IEC 61000-4-2
  • FCC Part 15, Subclass C

 

Power Requirements

Voltage Rating: 240

Operating Voltage: ± 20% (60 Hz); ±10% (50 Hz)

Frequency: 60Hz, 50hz

Operating Range: ± 3 Hz

Operating Environment

Temperature: -40° to +85°C

Humidity: 0% to 95%

non-condensing

Transient / Surge Suppression

ANSI C37.90.1-1989

ANSI C62.45-1992

IEC 61000-4-4
Accuracy
ANSI C12.20 0.5 accuracy class
General LCD Display

Five-digit liquid crystal display

Annunciator height: 0.088"

Data digit height: 0.4"

Electronic load indicator

Characteristic Data
Starting watts: 5 watts
Temperature Rise SpecificationsMeets ANSI C12.1 section 4.7.2.9
Burden Data*

Voltage circuit:

Voltage: 240 Watts: 0.5 VA: 7.5

Current coil-self contained test amp current: 60 Hz

Service: 3-Wire Test current: 30 Amps VA: <0.50

 


Watch The Meter In Use:
 


 





 

Recently Viewed Items

TOP