Atkinson Electronics Generator Start Controller
Atkinson Electronics Generator Start Controller

Atkinson Electronics Generator Start Controller

Write a Review
Your Price: $515.06
Part Number: GSCM
Availability: Out of Stock.

Atkinson Electronics Generator Start Controller


The Atkinson GSCM (generator start controller module) is a microprocessor-based generator-starting controller that receives start commands from any 12 VDC output or dry-contact switch, including an inverter or charge controller's auxiliary relay, a voltage-controlled relay, a timer, a water-tank float switch, or any user-supplied contact closure. It automatically controls a gas/propane or diesel powered generator or pump, and is sealed for harsh-environment operation.

The GSCM provides contact signal relays to start the engine and to disconnect the starter when a minimum generator frequency output is measured. It can monitor the generator operation, shutting it down and displaying the fault conditions detected. The GSCM must be manually reset after a generator fault.

The GSCM is powered by 12 to 24 VDC from a battery bank and will start generators for 12 to 48 VDC systems. For 48 VDC systems the GSCM must be powered by a 24 VDC-or-less tap on the 48 VDC battery bank, or from the generator’s starting battery. The GSCM provides a 30-day exercise function that can be synchronized with a photovoltaic input to only start each 30-day period at the beginning of the solar charge day. It also has a timed relay that can be used for diesel engine glow plugs. 2-year limited warranty. Dimensions are 5.5"H x 3.3"W x 1.5"D.


Length 5.5 IN 
Width 3.3 IN 
Height 1.5 IN 
Weight 1.4 LB
Series GSCM Manufacturer Part Number GSCM 
Warranty 2-years 

Recently Viewed Items

TOP