Can be used direct with batteries, solar panels, hydroelectric generators, as a wind turbine dump diversion load.
You can run high voltage through the element as long as you don't exceed the rated wattage of the element.
DO NOT USE GRID POWER AS IT WILL IMMEDIATELY DESTROY THE ELEMENT!
Can also be used as a solar panel dump load.
Tube diameter is 8 mm
Tube length is 7 inches (177.8 mm)
Foldback length is 3.94 inches (100 mm)
Overall length is 8 5/16 inches (211.1 mm)
Fits standard water heaters with a 1" NPT or your own custom heater tank.
Stainless steel materials
Volts & Wattages:
24 Volt 300 Watt Model
can also be wired for 12 Volts 80 Watts
48 Volt 600 Watt Model
can also be wired for 12 Volts 40 Watts
can also be wired for 24 Volts 160 Watts
can also be wired for 36 Volts 360 Watts
48 Volt 1000 Watt Model
can also be wired for 12 Volts 60 Watts
can also be wired for 24 Volts 250 Watts
can also be wired for 36 Volts 600 Watts
Livestock water tank deicer (low amp draw means you won't drain your battery as fast). For keeping dog, cat, chicken, and other domestic animals' water from freezing.
Standard American water heater element replacement for on or off grid applications
Campers, motorhomes, and RVs
Emergency hot water
Portable commercial, industrial machines and equipment
Runs off your car battery for portable hot water anywhere
Direct wind and solar applications
Cement mixing trucks
Use for DIY solar batch water heaters
For heating motor oil, vegetable oil, or most any other oils or liquids
and many, many more uses where heat or diversion loads are needed.
Question: How many watts are required to heat one gallon of water up one degree?
Answer: It requires 2.4705 watts for one hour.DC water heating elements are much safer than 110 volt
Click here to read more information about DC water heating elements.