Free shipping on hundreds of products

Pre-Wired & Ready to Go!

MidNite Solar Classic MPPT All-In-One Charge Controller Board

with Voltage Reducing Device for Wind

Comes with MidNite Solar Battery Temperature Sensor

& Optional MidNite Solar Surge Suppression Device

 

The Midnite Classic MPPT Wind Board can almost double your wind turbine's output at every wind speed over relay or PWM charge controllers. The Wind incoming power is routed through its own breaker, then converted by one of the most advanced MPPT charge controllers on the market to the most efficient charging algorithm and charging amperage available. This board connects to your battery bank, routed through a DC circuit breaker, for added security and fire protection!  This step is often neglected and is essential to installing to code.

Features:

  • MidNite Solar  Classic MPPT  Charge Controller
    • Simply  one of the most efficient Wind/Solar/Hydro MPPT controllers on the market  - made in the USA
    • The Midnite Classic MPPT Charge controller can almost double the output of your wind turbine over standard or PWM charge controllers by using a 16 point customization MPPT power curve. It's like having a sports car with 16 automatic gear changes to get you the most power at any speed!
  • Heavy-gauge, cleanly galvanized steel mounting board
    • Features folded ends and pre-punched wall mounting holes
  • Two MidNite Solar Baby Breaker Boxes pre-wired with the wind input breaker and battery output breaker
    • One box houses a MidNite 100 amp double pole breaker on the battery side of the controller  for safety that also serves as a convenient disconnect
    • The other Baby Box houses one 150 volt MidNite PV breaker for the wind turbine input that also serves as a convenient separate wind turbine disconnect
  • Two 8 foot heavy-duty pre-wired #4 gauge flexible battery cables with lugged & heat shrink sealed battery ends
  • Dual Wind Turbine Brake Switch and Dual Rectifiers
  • All components are internally grounded to the board which allows for easy grounding, saving you hours of time and frustration the wiring is pre-wired and securely clamped between components
  • Wiring is housed in electrical EMT conduit
  • Plug and play: Simply bolt or screw the unit into the wall and make your wind turbine and battery bank connections (no crimping or heat shrink needed, just insert and tighten down)
  • Perfect for residential or commercial, on grid or back up power, off-grid, and boat use
  • MidNite Solar's pre-wired battery temperature sensor ensures batteries do not overheat in charging cycle (peel the tape and stick to one of your batteries)
    • Maximizes performance for your inverter or charge controller
    • Sensor is attached to a 15' cable

Missouri Wind and Solar's trained staff is here to answer any technical questions you may have!

The Classic MPPT Charge Controller substantially increases the flexibility, features, and range currently found on MPPT controllers at an incredible price. 



Wind Classic Charge Controller Capacity:

MidNite Classic Controller12-Volt Charging Capacity
(12-volt battery bank)
24-Volt Charging Capacity
(24-volt battery bank)
48-Volt Charging Capacity
(48-volt battery bank)
Classic 150 MPPT
(150 operating voltage; 
Max. current out.: 96 amps)
14.14 volts @ 96 amps 
(1,380 watts of wind input power)
28.7 volts @ 94 amps 
(2,700 watts of wind input power)
58.4 volts @ 83 amps 
(4,847 watts of wind input power)
Classic 200 MPPT
(200 operating voltage; 
Max. current out.: 79 amps)
14.14 volts @ 79amps 
(1,137 watts of wind input power)
28.7 volts @ 78 amps 
(2,238 watts of wind input power)
58.4 volts @ 78 amps 
(4,550 watts of wind input power)
Classic 250 MPPT
(250 operating voltage; 
Max. current out.: 63 amps)
14.14 volts @ 61 amps 
(878 watts of wind input power)
28.7 volts @ 62 amps 
(1,779 watts of wind input power)
58.4 volts @ 55 amps 
(3,212 watts of wind input power)


MidNite Classic Charge Controller Features:

  • ETL listed to UL1741 and CSA
  • Exclusive HyperVOC extends VOC limits
  • 12-72V battery
  • Built in DC-GFP and Arc Fault Detector

MidNite Classic Charge Controller Specifications:

  • 14.9"L x 6"W x 4"D
  • Warranty - 5 yrs.
  • Listed by ETL for US & Canada
  • CE Certified Listed
  • FCC Class B Listed
  • Made in the USA
Product Documents:


Product Compatibility:

    The VRD Dynamic Brake is compatible with any 12, 24, or 48 volt wind turbine with a blade diameter +/- 80 inches (2.03 meters), vertical axis wind turbines (VAWT) under 2000 watts peak power. Gas motor driven generator setups have not been fully tested with the VRD. If the open circuit voltage of motor driven generator remains under the upper limits of the MidNite Classic Charge Controller, we don't expect any problems.


    MidNite Solar Classic Charge Controller Warranty:

    MidNite Solar offers an industry first, an extended warranty for all the Classic MPPT charge controllers. Six months prior to the end of the warranty period customers can ship their Classic back to MidNite Solar with a check for $147 dollars plus shipping and they will replace any wearable parts and do a general tune-up. This will extend the warranty by 2 additional years, another good reason to purchase a Classic.

    If you are permitting any battery based system, the Classic is the only controller that has Arc fault integrated. That will save on a costly arc fault combiner.

    See how the MidNite Classic compares to other controllers such as the OutBack, Blue Sky, Xantrex, Morningstar, and Apollo brands.



    The Classic with Our Freedom II Wind Turbine:

    Charge Controller Specifics
    Application Wind Turbines
    Display LCD Display
    Feature MPPT (Maximum Power Point Tracking)

    Write a review

    Please login or register to review

    Pre-wired MidNite Solar Classic MPPT All-In-One Charge Controller Board with VRD for Wind

    • Brands MidNite Solar
    • Product Code: CBSUCLASSICVRD
    • Availability: In Stock
    • $1,499.99


    Available options


    Related Products

    MidNite Solar Classic 150 MPPT Charge Controller

    MidNite Solar Classic MPPT Charge Controller 150  The Classic MPPT Charge Controller - 150 substanti..

    $655.99

    MidNite Solar Classic 200 MPPT Charge Controller

    MidNite Solar Classic MPPT Charge Controller 200The Classic MPPT Charge Controller - 200 substantial..

    $656.99

    MidNite Solar Classic 250 MPPT Charge Controller

    MidNite Solar Classic MPPT Charge Controller 250 The Classic MPPT Charge Controller - 250 substanti..

    $806.99

    MidNite Solar WhizBang Jr

    MidNite Solar WhizBang Jr  The Whiz Bang Jr is a current sense module that attaches to the standard ..

    $65.99

    MIdNite Solar 150 VDC MNEPV Din Rail Breakers

    MIdNite Solar 150 VDC MNEPV Din Rail Breakers   1 Amp to 63 Amps  Note: Branch circui..

    $17.99

    Midnite Solar Surge Protection Device

    Midnite Solar Surge Protection Device  The MidNite Solar Surge Protector Device (MNSPD) is des..

    $106.99

    Missouri Wind Voltage Reducing Device (VRD)

    Missouri Wind Voltage Reducing Device Introducing the Missouri Wind and Solar voltage reducing, dyna..

    $389.99

    Tags: charge controller, MPPT, all in one, all-in-one, MidNite Solar, Classic, Wind Turbine, voltage reducing device, VRD, CBSUCLASSICVRD