|
|
 |
Weight |
Product Image |
Price |
Item Name |
Model |
 |

|
|
|
 |
36 |
|
$198.89
... more info
|
Missouri Wind 100 watt solar panel kit For 12 or 24 Volt battery charging Kit Includes: 1 - 100 Watt Solar Panel 1 - 10 Amp 12/24 Volt charge... |
100W_Solar_Kit |
 |

|
|
|
 |
42 |
|
$298.89
... more info
|
Missouri Wind 100 watt solar panel kit with AIMS 300 watt Pure Sine wave inverter Kit Includes: 1 - 100 Watt Solar Panel 1 - 10 Amp 12/24 Volt... |
100W_Solar_Kit_300WINV |
 |

|
|
|
 |
40 |
|
$238.89
... more info
|
Missouri Wind 100 watt solar panel kit with AIMS 400 Watt Modified Sine wave inverter Kit Includes: 1 - 100 Watt Solar Panel 1 - 10 Amp 12/24 Volt... |
100W_Solar_Kit_400WINV |
 |

|
|
|
 |
3 |
|
$59.98
... more info
|
This divert load resistor is for use to divert the excess power being generated when your wind turbine generator batteries are full and can be ran at... |
DVL2-12 |
 |

|
|
|
 |
8 |
|
$159.95
... more info
|
150 Amp, 3-phase Rectifier Center, 3-Phase AC to DC Rectifier. Works with 12 Volt to 400 Volt systems This unit will handle a massive amount of... |
MWR150 |
 |

|
|
|
 |
78 |
|
$1,338.00
... more info
|
1600 Watt 11 Blade Wind Turbine Kit Deluxe for home, business, or remote use - up to 1600 watt capability! This kit comes complete with almost... |
MW1600WKIT |
 |

|
|
|
 |
10 |
|
$78.50
... more info
|
170 Amp 600 Volt Blocking Diode array - in an industrial duty enclosure. Prevents reverse current flow (discharge), in solar and DC wind turbines.... |
MWB170R |
 |

|
|
|
 |
56 |
|
$649.98
... more info
|
Missouri Wind 200 watt solar panel kit For 12 or 24 Volt battery charging Kit Includes: 2 - 100 Watt UL, CE approved Grape Solar panels w/ 25 year... |
200W_Solar_Kit |
 |

|
|
|
 |
2.5 |
|
$59.98
... more info
|
This divert load resistor is for use to divert the excess power being generated when your wind turbine generator batteries are full and can be ran at... |
DVL2-24 |
 |

|
|
|
 |
23 |
|
$199.00
... more info
|
Cannot run directly from a 48 volt battery bank. Instead you must wire it into the 24 volt section of the bank without reconfiguring your battery... |
DC_Fan |
 |

|
|
|
 |
0.4 |
|
$0.98
... more info
|
25 Amp ATC Fuse |
FSA-25 |
 |

|
|
|
 |
0.4 |
|
$6.99
... more info
|
This block replaces the rectifier in your permanent magnet alternator (PMA). This product is for 3-phase systems only. |
3PB |
 |

|
|
|
 |
3.5 |
|
$89.98
... more info
|
The kit comes with wind turbine brake switch, bridge rectifier and heavy duty electrogalvanized steel recessed back plate all pre-wired and ready to... |
MWBSR_Combo |
 |

|
|
|
 |
1 |
|
$19.98
... more info
|
3-Phase Diode Bridge Rectifier - 90 Amp, 1000 Volt. Convert your three phase current input into DC with this brand new and unused, high quality 90... |
SQL90A |
 |

|
|
|
 |
1.1 |
|
$59.98
... more info
|
30 Amp Solar Charge Controller for both 12/24 Volt Systems. The 30 amp solar charge controller features: - Connect 30 amps total worth of solar into... |
PWMSCC |
 |

|
|
|
 |
0.8 |
|
$12.98
... more info
|
4 1/2” Rotary Fan Specifications: - 12 VDC operation - 0.30 Amp - 1 1/2” deep |
4.5-FAN |
 |

|
|
|
 |
0.4 |
|
$6.49
... more info
|
40 Amp 600 Volt Blocking Diode These are a must for solar panels or wind turbines that do not have diodes like diy solar panels, or dc wind turbines,... |
BD40 |
 |

|
|
|
 |
0.4 |
|
$6.49
... more info
|
40 Amp 600 Volt Blocking Diode. These are a must for solar panels or wind turbines that do not have diodes like diy solar panels or dc wind turbines ... |
BD40 |
 |

|
|
|
 |
3.1 |
|
$119.99
... more info
|
The 440 amp charge controller with divert relay can be used with our divert loads (divert load sold separately). Some diversion loads include,... |
MW440ECC |
 |

|
|
|
 |
2.5 |
|
$59.98
... more info
|
This divert load resistor is for use to divert the excess power being generated when your wind turbine generator batteries are full and can be ran at... |
DVL2-48 |
 |

|
|
|
 |
40 |
|
$669.00
... more info
|
The bitterness of low quality is long remembered after the sweetness of low price is forgotten! Great wind turbine kit for home, business, or remote... |
MW600WKIT |
 |

|
|
|
 |
38 |
|
$1,499.00
... more info
|
Overview: PWRIG700024024 Overview: At 7000 watts and up to 14000 watts for 9 seconds the Industrial Grade Modified Sine Wave Power Inverter promises... |
PWRIG700024024 |
 |

|
|
|
 |
43 |
|
$779.00
... more info
|
Missouri Wind and Solar takes the guess work out of which components to purchase for your wind turbine setup! This kit comes complete with most... |
MW800WKIT |
 |

|
|
|
 |
2.7 |
|
$36.98
... more info
|
90 Amp 1000 Volt 3-Phase Bridge Rectifier Kit for permanent magnet alternator (PMA) wind turbines. A must for high Amp output wind turbines.... |
90A1000V3PRKT |
 |

|
|
|
 |
9.5 |
|
$279.89
... more info
|
Missouri Wind 12 or 24 Volt 440 Amp/10,000 Watt Hybrid Wind and Solar Charge Controller comes prewired for plug and play with divert load, 3-phase... |
3PAll_In_One |
 |

|
|
|
 |
1.4 |
|
$34.00
... more info
|
AC 50 Amp Output Rectifier Kit comes with: 1 Heavy Duty Bridge Rectifier mounted to 1/2" polycarbonate plate 1 AC connector pigtail for connection to... |
ACKIT |
 |

|
|
|
 |
7.4 |
|
$199.89
... more info
|
Please choose between 12 volt or 24 volt before adding the item to the cart. Missouri Wind 12 or 24 Volt 440 Amp/10,000 Watt charge controller comes... |
3PHBC |
 |

|
|
|
 |
2 |
|
$6.00
... more info
|
1 foot length of high quality fine stranded black #4 AWG battery cable - Factory made copper terminal ends, tin plated - Heat shrunk and sealed cable... |
BN4BATCAB1FT |
 |

|
|
|
 |
2 |
|
$6.00
... more info
|
1 foot length of high quality fine stranded red #4 AWG battery cable - Factory made copper terminal ends, tin plated - Heat shrunk and sealed cable... |
RN4BATCAB1FT |
 |

|
|
|
 |
0.6 |
|
$18.98
... more info
|
Brake Switch for Wind Turbines Single Throw Double pole ON-OFF-ON / 20 Amps at 110 volts. Used as a brake switch for a three phase ac or dc wind... |
BS1 |
 |

|
|
|
 |
1.2 |
|
$49.95
... more info
|
These "CDS" series continuous duty relays are sold in non-grounded insulated cases (lightning proof). Available in either 12-15 volts and... |
CDSRELAY |
 |

|
|
|
 |
1 |
|
$21.89
... more info
|
DC Breaker with 1/4 Inch brass lugs 100 to 250 amp models available. Comes with manual reset lever and test switch for manual disconnect. Use as an... |
DCBRK |
 |

|
|
|
 |
4 |
|
$38.00
... more info
|
Our PMA case comes with 4 bolts and heavy duty front and rear bearings. A perfect match for all Missouri Wind PMA parts. Perfect for building your... |
D10SI |
 |

|
|
|
 |
2.8 |
|
$79.98
... more info
|
Double 90 Amp 1000 Volt 3-Phase Bridge Rectifier Kit for permanent magnet alternator (PMA) wind turbines. A must for high Amp output wind turbines.... |
D90A1000V3PRKT |
 |

|
|
|
 |
25 |
|
$449.00
... more info
|
Economy hybrid charge controller board for 12 volt systems by Missouri Wind and Solar. Here it is, finally a ready to go system! Just add wind and/or... |
ECO_CCBoard_12V |
 |

|
|
|
 |
2 |
|
$24.98
... more info
|
Pole barn roof cap for wind turbine tower pipes (as seen in roof mount diagram). Flexible base will mold with ribbed pole barn steel to make a... |
PBC1 |
 |

|
|
|
 |
2 |
|
$24.98
... more info
|
Pole barn roof cap for wind turbine tower pipes (as seen in roof mount diagram). Flexible base will mold with ribbed pole barn steel to make a... |
PBC1 |
 |

|
|
|
 |
0.3 |
|
$3.98
... more info
|
This front bearing is for building your own permanent magnet alternator (PMA). |
FB1 |
 |

|
|
|
 |
1 |
|
$21.94
... more info
|
300 Watt divert and dump load resistor with two mounting brackets - will work with any charge controller and is easily installed! Great for novice,... |
GRN-RES |
 |

|
|
|
 |
4 |
|
$40.00
... more info
|
High quality fine stranded inverter cable # 1 AWG - 4 foot pair. One black and one red flexible cable. - Factory made copper terminal ends, tin... |
N1INVCAB4FT |
 |

|
|
|
 |
4 |
|
$60.00
... more info
|
High quality fine stranded inverter cable # 1 AWG - 6 foot pair. One black and one red flexible cable. - Factory made copper terminal ends, tin... |
N1INVCAB6FT |
 |

|
|
|
 |
3.8 |
|
$35.00
... more info
|
High quality fine stranded inverter cable # 2 AWG - 4 foot pair. One black and one red flexible cable. - Factory made copper terminal ends, tin... |
N2INVCAB4FT |
 |

|
|
|
 |
4 |
|
$50.00
... more info
|
High quality fine stranded inverter cable # 2 AWG - 6 foot pair. One black and one red flexible cable. - Factory made copper terminal ends, tin... |
N2INVCAB6FT |
 |

|
|
|
 |
3 |
|
$30.00
... more info
|
High quality fine stranded inverter cable # 4 AWG - 4 foot pair. One black and one red flexible cable. - Factory made copper terminal ends, tin... |
N4INVCAB4FT |
 |

|
|
|
 |
3.8 |
|
$40.00
... more info
|
High quality fine stranded inverter cable # 4 AWG - 6 foot pair. One black and one red flexible cable. - Factory made copper terminal ends, tin... |
N4INVCAB6FT |
 |

|
|
|
 |
3 |
|
$36.94
... more info
|
The Cobra Hi Beam Series 60 LED light bar features super bright illumination with up to 4 hours of use on a single charge with 100,000 hour LED life.... |
LED60 |
 |

|
|
|
 |
32 |
|
$299.98
... more info
|
Missouri Basic 500 watt, 12 or 24 volt, DC output, 5 blade wind turbine for 12 or 24 volt battery charging Blades begin to spin at only 5 mph - wind... |
500W_5Blade_Basic |
 |

|
|
|
 |
46.12 |
|
$849.00
... more info
|
!NEW!! This is our MISSOURI SUPER DUAL GENERAL WIND TURBINE 2000 watts plus potential power. Our most powerful wind turbine for home or business use.... |
RENDUALRAPTOR11 |
 |

|
|
|
 |
98 |
|
$3,798.00
... more info
|
The new FLEXpower ONE System accommodates all the essential protective devices in a small space at a low installed cost for applications with modest... |
FP1 |
 |

|
|
|
 |
44 |
|
$799.00
... more info
|
This power inverter is a true workhorse, this 220 50hz power inverter is capable of handling 8000 watts continuous. This power inverter is designed... |
PWRI8K22050 |
 |

|